The LED Light for My PCis Not Lit on My Modem. I Cannot Get Internet.What Could Be Wrong and How Can

Click on the little icon, of 2 screens, bottom right. Click the support tab in the box that opens. Click the Repair Connection button.

1. How to install Flex LED light strips to my amplifier or interior of car?

Alpena Flex Led

2. what is the adapter cord called that has a round and square prong for a led light strip?

That is a 2 pin DIN plug. It was used to be used for old European stereos for speakers, but has been used for wall wart supplies for low voltage lighting and fountains. You need to get a supply rated for your strip to start, then worry about the plug.

3. How can I test a household LED light bulb?

Use the meter and carefully probe in volts mode these two points in the socket. You should read the same voltage as AC mains. Make sure you understand the dangers of probing mains voltage. Also make sure that you are twisting the bulb in the right direction

4. if a 100 watt incandecent bulb is equal to a 23 watt Flourecent than a 21 watt LED light is equal to what?

It is difficult to figure out what you mean by that. if you mean in terms of light output, they should all be about equal. the light output is different from the wattage. wattage refers to power usage, light intensity is measured in lumens

5. what led light products r u referring to?

nowadays, there are a lot of type of LED lights you can find on the lighting market, such as LED strips lights, LED grow light, LED flashlight, LED par lights, LED automotive lights, and so on. as the LED cave safe more energy and can last long life, I like to buy lots of LED bulbs for household use, led tube, for example

6. I bought LED Light to go under my motorcycle, i know how to run it to my battery, but it just came with wires?

Go to the auto parts store and buy a 12 volt toggle switch.Hook the neg to the neg on the battery,then split the pos wire with the switch in the middle,then the other end to the pos on the battery.For safety you should wire a fuse between the switch and the battery-I used a 5 amp on my bike. you can add onto the positive lead so you can mount the switch wherever you want. Mine is in my trunk so kids can not turn it on

7. My remote starter for my vibe is broken. The little red LED light stays on and none of the buttons work.?

Check that loose nut behind the wheel

8. Does a 17 watt LED light bulb make the room hotter?

Insignificant, but more people in a room does

9. What company would be able to run an LED light inside a glove (cable) with the light source coming through the?

here are 4 sites hope one is there you can use, bless you

10. What is the main advantage of LED light bulb ?

The future of household lighting will soon be the wide spread adoption and use of white energy efficient LED light bulbs. Though the present market for finished white LED products is geared mainly towards enthusiasts and early-adopters, the efficiency and cost effectiveness of LED lighting systems will drive demand for more affordable LED lights. Opto-electronics is an exciting area and we predict, that in the near future, white LED lighting applications will be powerful and cheap enough to replace incandescent lighting for everyday use in our homes, in street lights, outdoor signs, and offices.

11. What is the best led light for growing marijuana ?

HPS-High Pressure Sodium, MH-Metal Halide, CFL-Compact Flourescent Lighting, LED-light-emitting Diode, and of course The Sun...!!

12. Why is one of the spokes coming from an LED light longer than the other?

The longer one is positive and the short one is negative

13. How to wire LED light to old wiring layout

That looks like standard UK wiring using older colours.You should really go out and buy a voltage tester but you can make up a test lamp with a pendant lamp-holder and a low-wattage bulb.The lamp holder can be obtained from many stores. Alternatively you probably have one somewher in your home or in a garage that you can temporarily borrow.The lamp holder has a bayonet socket (or Edison-screw socket) at one end for the light-bulb and at the other end, under a screw-off cover, has two screw-terminals for wire connections. Your wiring works like this, note that one of the black wires is a switched live. Connecting that to the other blacks will blow your fuse or trip your breaker when you turn the light on, so do not connect the blacks together yet.Step one is to identify which cable comes from the consumer unit. We are only concerned with the black (neutral) wires.Step two is to work out which of the other black wires is a switched live.Finally connect the spare black wire to the black wire that comes from the main panel (consumer unit)Before starting, I recommend you read the answers to